How to clean the watchband

How to clean the watchband

Wrist watches – part of the image, an indicator of good taste and the presence of individual style. That this accessory always fulfilled the obligations assigned to it, periodically it is required to make certain efforts for care of it. If the maintenance of the purity of the body and the performance of the mechanisms should be entrusted to professionals, to maintain the perfect appearance of the strap or bracelet, each accessory owner will be able to independently. Here are the simple guidelines, using which you will be able to clean the strap or bracelet quickly and well.

Clean the leather strap

Natural leather straps are equipped with many modern models, because they are comfortable and practical to wear, look solid and expensive. But here is their the durability of the have many causes doubts. To make the leather strap last as long as possible, you should follow certain rules of its use:

v  store away from direct sunlight;

v  to avoid moisture;

v  avoid direct exposure to heat sources;

v  during storage to allow free access of air;

v  do not wear too tightly on the hand, leaving a small ventilated gap between the product and the hand;

v  wipe the strap with a soft damp cloth once a week.

Such care will significantly extend the period of operation of the product and will keep its presentable appearance for a long time. Complex contamination can be removed in one of the described ways.

But before you start work, it is recommended to disconnect the watch and strap, so as not to accidentally damage the case, glass or mechanism.

Option 1

Suitable for products of dark colors. Combine baking soda and water in a proportion to obtain a homogeneous paste-like mixture. Apply it to the product and leave for 30-60 minutes, then rinse well with lukewarm water. Leave the strap to dry at room temperature.

Option 2

It is used to remove dirt and refresh leather products of light shades. Take a glass of milk, add 1 crude protein and whisk thoroughly. Moisten a clean cloth (light!) and walk it on the strap. Rinse well in cool water and leave to dry on a table or any other flat surface.

Option 3

Prepare a light solution based on toilet soap and put the product in it. After a few minutes, gently brush over the entire surface with a soft pile. Rinse with water, Pat with paper towels and then leave for about a day in the room to dry completely. Tip: use ordinary toilet soap, not household chemicals, because it is difficult to predict what effect it will produce on the leather strap.

Option 4

Get professional tools to clean the skin from dirt. They act softly, but effectively, although the price is high. Soak a cloth cloth and walk it over the product.

Option 5

If you have a watchband made of unusual materials (snake skin, Stingray, ostrich, etc.), for leaving him you can not use any solutions. Only dry cleaning with a cloth in the direction of flakes is recommended.

Clean metal bracelets

Based on the practicality, metal bracelets significantly superior to leather, and to maintain their purity is much easier. To preserve the beauty and functionality of the bracelet, try to avoid mechanical damage during operation, periodically remove dust and dirt from the links.

Option 1

Prepare a solution of warm water and any detergent (liquid soap, shampoo, even dish detergent) and place the bracelet in it for about half an hour. Then wipe it with a cloth or brush, rinse with water and wipe thoroughly.

Option 2

You can use ammonia, pre-dissolved in water a few drops. The approximate concentration of 2-4 drops of alcohol per glass of water. Immerse the bracelet in the solution for 20-30 minutes. At the end of time, rinse well with clean water, wipe dry. 

Option 3

It involves the use of a mixture based on vinegar and soda. Can be used on bracelets of any kind, including precious metals. Mix both components until obtaining a homogeneous paste-like consistency. Apply the mixture to the product and wipe it with a cloth, then rinse thoroughly and dry.

Other types of bracelets and straps

Titanium alloy bracelets are recommended to be cleaned with a regular eraser. Dirt between the links can be removed with a toothbrush and toothpaste. For polishing the product is recommended to use a lint-free cloth.

Fabric and rubber straps result in a proper appearance will help soft soap solution.

The online store of watches "best Time" presents a variety of models of accessories with leather straps and metal bracelets. Walking through the catalog, you will be able to find a chronometer that you like and design, and for the price, and taking advantage of our recommendations, you'll be sure to save a presentable appearance.