Is it possible to shorten a bracelet on a watch yourself?

Is it possible to shorten the bracelet on a wrist watch yourself?

Wrist watches with a bracelet are very popular among both men and women. They look stylish and presentable, are reliable and practical to wear. But it is not always possible to initially "get" to the correct size of the bracelet. As a result, the watch dangles on your hand, which causes a lot of inconvenience in the process of wear. But this is not a reason to refuse a new accessory. The metal bracelet can be shortened to fit exactly to the size of the wrist.

How to shorten the bracelet on a wrist watch: simple ways

Before you start the work process, prepare the workplace properly. The table should be covered with a cloth tablecloth or napkin light solid color. Thanks to this, the watch will not be scratched, and all the details and elements will be clearly visible. You can also use paper.

The following tools are required to perform the work:

·         a pointed object, such as an awl;

·         small wooden hammer;

·         pliers;

·         small screwdriver.

Shortening the strap can be performed in several ways, depending on the manufacturer of the product and the model. In one case, it will be enough to correct the key buckle, and in the other you will have to remove the links. Consider the most popular ways to shorten the bracelet of a wristwatch.

Standard solution

Suitable for bracelets that are shortened by removing links. It is necessary to put the watch on your hand and fix it so that it fits tightly around the wrist, but not peredavlivali it. Turn your hand with the watch wrist up. Alternately, start removing the links with an awl and pliers until you reach the optimal size. The main condition is that the number of deleted elements on both sides must be the same. If it is not observed, the center of the clasp will shift, which will cause inconvenience in the subsequent wear.

We use a special machine

If you consider yourself a fan of watches on metal bracelets, think about the feasibility of purchasing a special machine for shortening the bracelet. It will certainly be useful to you more than once.

This is a compact and simple device in terms of design. Initially, you need to measure the circumference of the wrist. Next, place the watch inside this machine, lock it and start turning the handle until the pin holding the link is completely unscrewed. After that, you will only need to remove this hairpin and connect all the necessary elements of the bracelet.

Adjust the position of the lock buckle

These manipulations will be optimal if the size of the metal bracelet should be reduced slightly. In this case, you should do the following manipulations:

·         arefully remove the locking pin. To do this, press lightly on the visible part of it.

·         Select the hole closest to the latch.

·         Do not move the pin from the side where it was originally located, because otherwise, while wearing the ear will constantly cling to the clothes, causing constant discomfort.

The whole procedure will take a few minutes.

What should I do if the bracelet has a pin-shaped mount?

The modern market is striking not only for the variety of wristwatches, but also for metal bracelets. Fasteners can be very different: in the form of pins, screws, plates, studs. The last option has its own nuances, so let's focus on it in more detail.

A hairpin is a kind of plate bent in half. One side is flat or slightly rounded, and the other has a cut. Most modern manufacturers have provided for the need to shorten the bracelets. They marked the side where the hairpin should be knocked out. The corresponding arrows are marked on the inside of the product.

Using pliers and an awl, squeeze out the pin, then remove the detached links, then insert the pin back. The main thing in this process is not to confuse the parties from which this or that link is removed. Therefore, we recommend putting them each in their own direction.

When performing work, be very careful not to scratch the bracelet or the watch itself with metal tools.

This principle of action and recommendations should be followed when shortening the bracelet made of plates. Pick them up with an awl or other sharp object and remove them using pliers.

If you are not sure that you will be able to understand all the details of the upcoming process and perform the work properly, seek professional help from a watchmaker. Experts quickly and shorten the bracelet, perfectly fitting it to your wrist. And at a price, this procedure is available to everyone.

But you can choose a wrist watch with a metal bracelet for men and women in the online store of the company "best-Time". The product catalog offers a wide range of accessories in different price categories, ranging from quite budget to premium. Before shipping, the order is checked by the watchmaker. You get certified products without defects and with reliable guarantees.

If you need additional expert advice, please contact us by phone or send an online request.