Repassage hours

Repassage hours

Are you the owner of a quality mechanical wristwatch? Began to notice that the clock is slow, sticky buttons or visible under the glass dust? Then we recommend you check repassage procedure, which is necessary for maintaining constant hours in working condition.

This is quite time-consuming work, the key task of which is to clean and lubricate the main mechanisms and parts of the watch. The body is disassembled, all parts are removed, their audit for wear and clogging is carried out. For modern chronometers, this procedure is more in demand than for watches of antique value. Recently, quite seriously increased functionality and requirements for the accuracy of the clock, which in turn affects the wear of mechanisms.

The essence of repassage

The mechanism of a mechanical watch is a complex system of rotating parts assembled with high precision. Most parts are in constant engagement and therefore in a stressed state. The most loaded part is the automatic winding system, spring and reverse wheel. In any case, the mechanisms need cleaning and preventive inspection. Separate theme dust and fat deposits. Even a tightly closed back cover can not serve as a full guarantee of protection against contamination. Foreign particles trapped inside the case negatively affect the properties of lubricants used in watches. Therefore, reprisal is more a necessity than a fad.

What are the signs of function are the indications for repassage

While the wrist accessory is new, you can not think about this procedure. The better assembled your product, the longer it will work seamlessly. However, there are a number of signs in which it is necessary to consult a specialist:

·         he clock starts to show the wrong time or often strays;

·         the crown of the watch rotates with effort, does not reach the end or does not rotate at all;

·         slowing down or Vice versa acceleration of the arrows, which can be seen even with the naked eye;

·         automatic winding does not cope with its task, the watch stops during the day, even with heavy walking.

How often is it necessary to make a repass?

The manufacturer of the watch in the operating instructions sets the recommended timing of the repassage for each specific model. This can be a period of about a year or several years. Rational is the duration of the procedure every three to five years, depending on the condition of the clock. The need for the procedure, the user can determine independently on the above grounds. However, a more accurate answer about the need for cleaning and restoration can only be given in the service center. Specialists conduct specialized tests to assess the accuracy of the clock and a number of other signs of proper operation.

The algorithm of repassage

To carry out this procedure, initially a specialist makes a complete disassembly of the clock mechanism. The wear or clogging of the components is then assessed and a decision is made to clean or replace the worn parts. The necessary parts of the clock mechanism are first immersed in an alkaline solution, where, under the action of ultrasonic waves, fatty mud deposits are removed.

After that, the parts are washed in ordinary water, and then in a specialized solution. The purpose of treatment in solution is to conduct a thorough degreasing of parts. At this point, the cleaning of the product can be considered complete. The next step is to place the parts in a special drying chamber, where moisture is completely removed from the surface. And in conclusion, the clock mechanism is fully assembled with the preliminary application of lubricant to the rubbing surfaces.

What do you get as a result of the massage?

It should be remembered that the procedure of massage can be entrusted only to an experienced master with years of experience and a specialized service center. Remember: the accuracy of the Assembly of the clock mechanism will depend on his work. Especially if your model is expensive, it is not recommended to save on the quality of this work.

As a result of professionally performed procedure you will receive:

·         watch with original attractive look;

·         removal of dust, dirt and various deposits on the external and internal parts of the accessory;

·         protective coating treatment to prevent clouding;

·         complete testing of watch movements after Assembly and quality assurance.

If you only plan to become the owner of a mechanical watch, you can choose a suitable accessory in the online store "best-Time". A large selection of decent models, detailed description, warranty, will allow everyone to find the perfect wristwatch for yourself.

If necessary, you can always seek professional advice from store managers.